PMC-5151-EN

Web-based Power Meter Concentrator

Description

Web-based Power Meter Concentrator

FEATURES

  1. Runs on browsers, no extra software tool is required.
  2. No more programming, Web pages provided for control logic editing.
  3. Support at most “24 ICP DAS Modbus Power Meter modules + 8 Modbus I/O modules” (Max. total of 16 TCP type modules)
    • COM2 and COM3 interface can connect to Max. 16 Modbus RTU modules (include Power Meter & I/O Module) individually.
    • LAN interface can connect to Max. 16 Modbus TCP modules (include Power Meter & I/O Module).
    • Support at most 4 ICP DAS PM-4324 series Power Meters.
  4. Display real-time or historical power data by browser. Provide power data statistics report by browser.
  5. Provide microSD card for power data log operation. Data log file auto send-back & recovery when disconnected network is resumed.
  6. Built-in IF-THEN-ELSE logic engine for power demand management.
  7. Provide alarm message notification function via Email or SMS (for SMS message sending, GTM-203M-3GWA is required).
  8. Adjust device operations by its power status via Modbus I/O modules.
  9. Provide Schedule function for operations of I/O modules (devices).
  10. Support Modbus TCP/RTU, FTP and SNMP protocols.

Introduction

The PMC-5151 is a web-based intelligent Power Meter Concentrator developed by ICP DAS. It offers webpage interface, and features various functions such as: power data collection, logic control, power demand management, data logger and alarm notification functions.PMC-5151 allows connections to ICP DAS Smart Power Meters via RS-485 or Ethernet interface to read the power data of the devices measured by the power meters; and then real-time record the power values in the data logger file. It also provides data logger file auto send-back function; together with PMC Data Server software or SCADA software, it allows collection and analysis of the power data.

PMC-5151 is equipped with built-in Web Server that allows direct connections via browsers to the PMC-5151 for viewing power data and setting up the system parameters. It also offers Modbus TCP/RTU Slave function that allows SCADA software or HMI devices to connect to PMC-5151 to get real-time power data of the devices via Modbus TCP/RTU protocol.

In addition to ICP DAS XW-Board and M-7000 I/O modules, the PMC-5151 can also connect to standard Modbus TCP/RTU Slave modules. By working with the I/O modules, and functions such as IF-THEN-ELSE logic rule execution and alarm notification functions including Email/SMS/SNMP Trap, PMC-5151 offers more thought-out power demand management and alarm notification functions, and is able to perform load shedding of the devices if required, and enables real-time monitoring and control of the power consumption of the devices.


Applications

  • Energy measurement
  • Monitoring
  • Management
Software
Protocol • Modbus TCP/RTU for SCADA software
• FTP Client & Server
• SNMP & SNMP Trap
• DDNS
Function • Web Interface for Configuration
• IF-THEN-ELSE Logic operation (Unlimited rule supported)
• Power meters & I/O modules monitoring and control
• Data Logger operation
• Timer operation (Unlimited set supported)
• Schedule operation (Unlimited set supported)
• Internal Register operation (48 set supported)
• non-SSL & SSL Email sending function
• SNTP Time Synchronization
Power Management • Power Data Display
• Historical Power Data Report
• Power Demand Management
• PUE Setting and Display
CPU Module
CPU 32-bit ARM CPU (520 MHz)
Storage Expansion microSD socket with 4 GB microSD card (support up to 32 GB microSDHC card)
LED Indicators
Status 1 x Power/Running
I/O Expansion
I/O Type XW-board
Remote Module Support M-7000/DL Series Module
Modbus RTU Slave Module
Modbus TCP Slave Module
Power Meter PM Series Modbus meter
COM Ports
Ports COM 1: RS-232 (RxD, TxD and GND); non-isolated;
COM 2: RS-485 (D+, D-); 2500 VDC; isolated;
COM 3: RS-485 (D+, D-); 2500 VDC; isolated;
Ethernet
Ports RJ-45 x 2, 10/100 Based-TX (Auto-negotiating, Auto MDI/MDI-X, LED indicators)
Power
Input Range 10 ~ 30 VDC
Consumption 4.8 W
Mechanical
Dimensions (mm) 91 x 126 x 52 (W x L x H)
Installation DIN-Rail Mounting
Environment
Operating Temperature -25 ~ +75 °C
Storage Temperature -30 ~ +80 °C
Humidity 10 ~ 90% RH, Non-condensing
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
Click outside to hide the comparison bar
Compare