Intel® Bay Trail N2930 SoC Processor, DDR3L up to 8GB, support multiple USB ports, Support Wide Voltage 9~24V DC-in
Intel® Bay Trail N2930 SoC Processor, DDR3L up to 8GB, support multiple USB ports, Support Wide Voltage 9~24V DC-in
FEATURES
I/O DIAGRAM
ACCESSORIES
| Part Number | Description |
| JNF531M M/B | |
| G01-SATA3-BL-1F | SATA cable |
| G01-PW4PS-2S-323F | SATA Power cable |
| Form Factor | |
| Dimensions | – 3.5” SBC (148X102 mm) |
| Processor System | |
| CPU | – Intel® Bay Trail N2930 SoC Processor |
| Core Number | – 4 |
| Max Speed | – 2.16GHz |
| L2 Cache | – 2MB |
| Chipset | – SoC |
| BIOS | – AMI 64Mb Flash ROM |
| Expansion Slot | |
| Mini-PCIe | – 1 (full size, shared with mSATA) + 1 (half size) |
| mSATA | – 1 (shared with full size Mini PCIe) |
| Memory | |
| Technology | – DDR3L 1333MHz SDRAM |
| Max. | – 8GB |
| Socket | – 1 * SO-DIMM |
| Graphics | |
| Controller | – Intel® HD Graphics |
| VRAM | – Shared Memory |
| VGA | – 1 (internal, Max. Resolution: 1920 * 1200@60Hz) |
| DVI-D | – 1 (Max. Resolution: 1920 * 1200@60Hz) |
| MultiDisplay | – Yes (Dual Display) |
| Ethernet | |
| Ethernet | – 10/100/1000 Mbps |
| Controller | – Realtek RTL8111G GbE |
| Connector | – 2 * RJ45 |
| SATA | |
| Max Data Transfer Rate | – 1 * SATAII (3.0Gb/s) |
| Rear I/O | |
| DVI‐D | – 1 |
| Ethernet | – 2 |
| USB | – 4 (3 * USB 2.0 + 1 * USB 3.0) |
| Audio | – 1 (Line-out) |
| Internal Connector | |
| DC‐input | – 1 |
| USB | – 4 ( 4 * USB 2.0) |
| PS/2 | – 1 |
| VGA | – 1 |
| Serial | – 4 (3 * RS‐232, 1 * RS232/422/485 with 5V/12V selectable header) |
| SATA | – 1 * SATAII (3.0Gb/s) |
| mPCIe | – 1 (full size, shared with mSATA) + 1 (half size) |
| mSATA | – 1 (shared with mPCIe) |
| SIM card holder | – 1 |
| GPIO 8‐bit | – 4-in / 4-out |
| Chassis intrusion | ‐ 1 |
| Audio Header | – 1 (Line-out & MIC) |
| HDMI‐SPDIF | – 1 |
| SMBUS | – 1 |
| AT mode jumper | – 1 |
| Watchdog Timer | |
| Output | – From Super I/O to drag RESETCON# |
| Interval | – 256 segments, 0,1,2…255sec/min |
| Power Requirements | |
| Input PWR | – +9~24V DC‐In (2‐pin PWR Con) |
| Power On | AT/ATX Supported ‐ AT: Directly PWR on as Power input ready ‐ ATX: Press Button to PWR on after Power input ready |
| Certifications | |
| Certifications | – CE, FCC, RoHS, REACH |
| Environment | |
| Temperature | – Operating: -20°C ~ 60°C – Storage: -40°C ~ 70°C – Humidity: 10% ~ 90% RH @40°C (non-condensing) |
* Specifications subject to change without notice, not responsible for typographical errors. Does not include HDD or OS.
