Description
Intel® Apollo Lake-I SoC processor, DDR3L up to 8GB, 1* M.2 (M-key), 1* M.2 (B-key), 1* M.2 (E-key), 2* GbE, Support Wide Temperature
FEATURES
- Intel® ApolloLake-I SoC Processor
- 1* DDR3L 1866MHz SO-DIMM up to 8 GB
- 2* 10/100/1000 Base-TX Ethernet Ports
- Support 2* HDMI display, 1* COM (RJ45 type), 4* USB3.1 (Gen.1)
- 1* M.2 M-key 2242, 1* M.2 B-key 3042, 1* M.2 E-key 2230
- 1* SATA III (6Gb/s), 32GB onboard eMMC
- 12V DC-in, Support wide temperature
OVERVIEW
The JETWAY MT95-90 is uTX form factor board adopts the Intel® Apollo Lake-I SoC Processor. The board supports one SO-DIMM DDR3L 1866Mhz memory, up to 8GB. Featuring the integrated Intel® Gigabit Ethernet controller, the MT95-90 offers two 10/100/1000Base-TX Ethernet device for network transmission. 32GB onboard eMMC, one SATAIII (6Gb/s) interface and one M.2 M-key offer storage devices. Four USB3.1 Gen.1 ports and one COM console ports provide versatile expansion. The M.2 E-key can support WIFI/BT. The M.2 B-key can support 3G/4G/5G. The MT95-90 offers two HDMI ports display. Because of the above features, MT95-90 is suitable for IOT Solution applications.
APPLICATION
I/O DIAGRAM
ACCESSORIES
Part Number |
Description |
|
MT95-90 M/B |
G01-PW4PS-2S-323F |
SATA Power cable |
G01-SATA3-BL-1F |
SATAIII cable |
MECHANICAL
Model |
– MT95-90 (E3940 SoC Processor, Default) |
Form Factor |
– uTX (117 x 112 mm) |
Processor System |
– Intel® Apollo Lake-I E3940 SoC Processor (TDP 9.5W) – AMI Flash ROM BIOS |
Expansion Slot |
– 1* M.2 M-key (2242) Support SATA interface – 1* M.2 B-key (3042) Support USB3.0 interface – 1* M.2 E-key (2230) Support USB2.0 & PCIex1 interface |
Memory |
– 1* SO-DIMM DDR3L 1866MHz SDRAM non-ECC up to 8GB |
Graphics |
– Intel® HD Graphics, shared memory – 2* HDMI (Max Resolution: 3840×2160@ 30Hz) |
Ethernet |
– 2* Intel® i210-IT GbE |
Audio |
– 4 channel HD audio: Realtek® ALC662VD |
Storage |
– 1* SATAIII – 32GB eMMC onboard |
Rear I/O |
– 2* USB3.1 (Gen.1) – 2* HDMI – 2* RJ45 – 1* COM (RJ45 type) – Audio combo (Line-out/ MIC) – 12V DC-in |
Front I/O |
– 1* PWR button – 2* LAN active LED – 1* HDD LED / 1* PWR LED – 1* AT/ATX mode switch – 2* USB3.1 (Gen.1) |
Internal Connector |
– 1* SATAIII – 1* GPIO (8 bit) – 1* SMBUS – 1* SIM card holder – 1* M.2 M-key (2242) – 1* M.2 B-key (3042) – 1* M.2 E-key (2230) – 1* TPM2.0 (onboard option) |
Watchdog Timer |
– From Super I/O to drag RESETCON# – 256 segments (10sec ~ 255min) |
Power |
DC-in 12V AT/ATX mode Supported at front side I/O switch – AT: Directly PWR on as Power input ready – ATX: Press Button to PWR on after Power input ready |
Compliance |
– CE, FCC, LVD, RoHS, REACH |
Temperature |
– Operating: -20°C ~ 85°C – Storage: -20°C ~ 85°C |
Warranty |
– 2 Years Limited Warranty |
* Specifications subject to change without notice, not responsible for typographical errors. Does not include HDD or OS.